In addition to standard conveyors, CTI Systems offers multiple Vision Inspection options, including AOI Reject Workstation and Edge Belt Vertical Reject Conveyor options. See the tabs below for standard features and options of our Vision Inspection Equipment.
CTI Systems has been manufacturing conveyors for over 30 years and has grown to offer a full range of automation solutions. From entry level conveyors, to fully integrated smart units, CTI Systems has a machine to fit your every need.
Please let us know how we can help your business grow. Call us at (919) 776-7227 or submit a contact form.
AOI Reject Workstation
- 1.2 Meters Line Length
- 1 Operator/1 Side
- Single Level Conveyor for Good PCB’s from AOI
- Exit Section lift for Failed PCB’s
- Once Failed PCB has been repaired, the Products will be lowered and released on the lower level.
- Bottom Lane is Pass Through for Good Product
- Top Lane is Inspection/Rework Area
- Dual sections on the pass-through level.
- E-Stop at Workstation Position
- Operator Modesty Panel
- Oval Work Surface (Antistatic work surface)
- Adjustable Rail Rear Shelf
- Swivel Monitor Mount with Keyboard Holder
- PC Shelf mounted on the bottom left of the uprights
- Light Tower
- Overhead Work Light
- Ground Plug for Operator
- PLC Controls with SMEMA Cables
- Power Strip for Soldering Iron, etc.
- Adjustable Footrest
- Board Edge Clearance = 3MM
- Hand Crank Width Adjust = 2.0″ – 16.0″
- Left to Right
- Pass Fail Signal to Downstream
- Automatic Width Adjustment
- 18″ x 20″, 21″ x 24″, 24″ x 28″ PCB Capability
- Right to Left Flow
- Automatic Width Adjust
- UL Listing
- CE Compliance
Edge Belt Vertical Reject Conveyor
- .6 Meter Edge Belt Conveyor
- Mechanical levers with lifts for one failed PCB
- Passed PCB’s pass-through mechanical levers to downstream machine
- Failed PCB’s can be removed without stopping the machine operation
- Light Tower with Alarm for failed boards
- User Friendly Control Panel
- Hand Crank Width Adjustment on Vertical Lifts = 2.0” – 16.0”
- Board Edge Clearance = 3MM
- PLC Controls with SMEMA Cables
- Pass / Fail signal from upstream machine required
- Left to Right Flow
- W- 18” x 20”, 21” x 24”, 24” x 28” PCB Capability
- Speed Control
- Additional Warning Light (For more attention)
- Right to Left Flow
- Automatic Width Adjust
- UL Listing
- CE Compliant
