The M4-Laser Marker is the advanced version of our original MS1 machine. The high speed topside X,Y servo gantry traverses the topside laser marker with two cameras. One for fiducial correction and live view teaching. The other for barcode read and verification the moment the product is marked. The MS4 has two conveyor sections. This allows for an optional internal flip conveyor on the entrance or exit section of the machine. The product enters on the infeed conveyor and is secured into place using dual precision board stops and board clamps.
Once marking is complete, the product moves to the second conveyor section and continues downstream. An Optional Label Applicator is available allowing for pick and place of Pre-printed labels. We also have the ability to place blank labels and laser etch them on the board. All labels are verified before the machine continues to the next position. This option allows for traceability for all customer products and requirements in one seamless machine.
- 30 Watt CO2 Laser
- 1.45 Meter Wide Footprint with 20″ W x 20″L PCB capability
- Fiducial correction and live teach/view camera.
- Secondary barcode read, and pattern inspection camera.
- PC controlled Windows 10 platform with CTI Laserware Software.
- 24 inch touchscreen monitor, keyboard, and mouse.
- Ready for inline or offline operation.
- Network communication ready.
- Fully enclosed with safety interlocks and front and rear E-Stops.
- Two Section Edge Belt Conveyor.
- Automatic Width Adjust (Both Sections)
- Status Light Tower with Alarm
- Keyence, and Synrad CO2 Lasers.
*Multiple CO2 models available to meet customer requirements. - Additional Laser Types available: Yag, Fiber, YVO4, Green, and UV.
- 3-Axis Galvo Heads for large marking areas to reduce cycle time.
- CTI High Speed Line Scan Barcode/Fiducial Verification.
*Verify 50 barcodes in under 3 seconds. - High Speed Servo Flip Conveyor (Replaces Entrance or Exit Conveyor)
- Fume Extractor units with filter alarm.
*If facility fume extraction unavailable. - Ionized Air Flood on Entrance or Exit
- Auto or Manual Bottom side Y-Axis Scanner on Entrance
- Servo Z-Axis for Laser Head
- Laser Z-Height Detection Sensor
- Networked Communication with MES
- Label Applicator Feature (2) pick heads.
- Auto Tool Change for Label Pick Nozzles
- Label Feeder Mounts for up to 5 feeders in machine at once.
- PCB Capability up to 24” W x 24”L
The M4-Laser Marker is the advanced version of our original MS1 machine. The high speed topside X,Y servo gantry traverses the topside laser marker with two cameras. One for fiducial correction and live view teaching. The other for barcode read and verification the moment the product is marked. The MS4 has two conveyor sections. This allows for an optional internal flip conveyor on the entrance or exit section of the machine. The product enters on the infeed conveyor and is secured into place using dual precision board stops and board clamps.
Once marking is complete, the product moves to the second conveyor section and continues downstream. An Optional Label Applicator is available allowing for pick and place of Pre-printed labels. We also have the ability to place blank labels and laser etch them on the board. All labels are verified before the machine continues to the next position. This option allows for traceability for all customer products and requirements in one seamless machine.
Standard Features
- 30 Watt CO2 Laser
- 1.45 Meter Wide Footprint with 20″ W x 20″L PCB capability
- Fiducial correction and live teach/view camera.
- Secondary barcode read, and pattern inspection camera.
- PC controlled Windows 10 platform with CTI Laserware Software.
- 24 inch touchscreen monitor, keyboard, and mouse.
- Ready for inline or offline operation.
- Network communication ready.
- Fully enclosed with safety interlocks and front and rear E-Stops.
- Two Section Edge Belt Conveyor.
- Automatic Width Adjust (Both Sections)
- Status Light Tower with Alarm
Options
- Keyence, and Synrad CO2 Lasers.
*Multiple CO2 models available to meet customer requirements. - Additional Laser Types available: Yag, Fiber, YVO4, Green, and UV.
- 3-Axis Galvo Heads for large marking areas to reduce cycle time.
- CTI High Speed Line Scan Barcode/Fiducial Verification.
*Verify 50 barcodes in under 3 seconds. - High Speed Servo Flip Conveyor (Replaces Entrance or Exit Conveyor)
- Fume Extractor units with filter alarm.
*If facility fume extraction unavailable. - Ionized Air Flood on Entrance or Exit
- Auto or Manual Bottom side Y-Axis Scanner on Entrance
- Servo Z-Axis for Laser Head
- Laser Z-Height Detection Sensor
- Networked Communication with MES
- Label Applicator Feature (2) pick heads.
- Auto Tool Change for Label Pick Nozzles
- Label Feeder Mounts for up to 5 feeders in machine at once.
- PCB Capability up to 24” W x 24”L
